The performance optimization experiment of a wet high-frequency vibrating grid
Abstract
Dust preventing is of great significant in mine safety production. The wet high-frequency vibrating grid is one of the most efficient dedusting systems. Therefore, optimizing the dedusting parameter of wet high-frequency vibrating grid is meaningful in dust controlling. Two of the most important part of wet high-frequency vibrating grid are spray dedusting system and vibrating grid filtration system. This study optimized these two systems respectively to obtain the influence of various factors on the two systems by using the method of orthogonal experiment and then chose two factors which have the greatest impact on comprehensive optimization. The results can be used in mine dedusting practice, to reduce the incidence of pneumoconiosis and improve work efficiency.
References
Chen, Y.H. (2013), Experiment on charged fog dedusting technology. Modern Mining, Volume 8, pp. 105-106.
Dong, W.Y. (2014), China coal mine dust control technology status and prospects. Science and Technology Information, Volume 4, pp. 225-227.
Liu, Y.B., Bai, Y.H. and Hou, J.G. (2011). Talking about the development of fully mechanized sublevel caving and the existing problems and countermeasures. Coal Mine Safety, Volume 06, pp. 160-162.
Li, Y.C., Zhang, Y.H. and Xiong, S.S. (2011), Study on dedusting technology with high-pressure atomizing and vibrating fiber grid. Nonferrous Metals (Mining Section), Volume 1, pp. 58-61.
Song, J.G. (2010), High pressurized external spraying dust control technology of fully mechanized coal mining face and applied research. Coal Engineering, Volume 10, pp. 43-45.
Shi, X.X. (2005), Current development and dust control technology research of fully mechanized coal faces. Journal of Safety Science and Technology, Volume 1, No. 1, pp. 41-43.
Wang, H.Q. (2010), Coal mine dust and removal technology and optimization of existing. Yunnan Vocational Institute of Energy Technology, Volume 24, pp. 26-28.
